Fixed: SPECIAL POOL DETECTED MEMORY CORRUPTION BSOD

The SPECIAL POOL DETECTED MEMORY CORRUPTION blue screen error often appears with the message below:

“A problem has been detected and Windows has been shut down to prevent damage to your computer.
The problem seems to be caused by the following file: ntoskrnl.exe
SPECIAL_POOL_DETECTED_MEMORY_CORRUPTION”

From the above message, you can know that this BSOD error is mainly triggered by the ntoskrnl.exe system file. Certainly, other system files like rtwlanu.sys and nvlddmkm.sys may also lead to the issue. Additionally, other factors like program compatibility issues, app glitches, corrupted/missing system files, hard drive errors, outdated drivers, hardware issues, as well as malware and viruses can also cause the error.

Based on these potential reasons, this post collects several troubleshooting methods for the SPECIAL POOL DETECTED MEMORY CORRUPTION BSOD. Try them now!

Related articles:

USB tethering causes blue screen

Windows 11 blue screen when idle

Blue screen after installing drivers

Some SSDs are causing blue screen

Kindly remind:

Since you are stuck on the SPECIAL POOL DETECTED MEMORY CORRUPTION BSOD, you need to reboot your computer to enter the Safe Mode and then perform the following troubleshooting operations. How to access Safe Mode? Power off and power on the computer several times to boot into the Windows Recovery Environment.

After that, click Troubleshoot > Advanced Options > Startup Settings > F4 > Restart. Then your computer will enter Safe Mode.

Fix 1: Run Program Compatibility

Incompatible programs on the computer can trigger various errors including the SPECIAL POOL DETECTED MEMORY CORRUPTION BSOD. To solve common compatibility issues between programs and operating systems, you can run the Program Compatibility Troubleshooter. Here are the steps for running it.

Step 1: Press the Windows and S keys, type troubleshoot settings in the search box, and then click on the searched result under Best match.

Step 2: In the elevated Settings window, find and click Additional troubleshooters.

Step 3: Scroll down the content in the next window to find Program Compatibility Troubleshooter. Then click on it and hit Run the troubleshooter.

Step 4: After a while, Program Compatibility Troubleshooter will list all the programs installed on the PC. Select the program that you’re having problems with and then click Next.

Step 5: Follow the pop-up instructions to complete the operation.

Fix 2: Perform a Clean Boot

In addition to compatibility issues, program glitches can also result in SPECIAL­­_POOL_DETECTED_MEMORY_CORRUPTION. You can boot Windows in a clean boot state to find which program causes your PC to crash with the SPECIAL POOL DETECTED MEMORY CORRUPTION BSOD.

The steps below show you how to perform a clean boot.

Step 1: Press the Windows and R keys simultaneously to open the Run dialog window.

Step 2: Type msconfig in the Run window and click OK to open the System Configuration window.

Step 3: Tap on the Services tab, tick the Hide all Microsoft services option, and then click Disable all.

Step 4: Click the Apply button to execute the operation.

Step 5: Switch to the Startup tab and click the Open Task Manager link.

Step 6: Under the Startup tab, right-click on the startup process and click Disable. Then repeat this operation until all the unnecessary startup processes are disabled.

Step 7: Reboot the computer and check if the SPECIAL POOL DETECTED MEMORY CORRUPTION blue screen error disappears.

Fix 3: Perform an SFC Scan

As you know, SPECIAL­­_POOL_DETECTED_MEMORY_CORRUPTION error is often caused by system files like ntoskrnl.exe, rtwlanu.sys, and nvlddmkm.sys. System files on the computer play an important role in the proper running of the PC. When they get corrupted or lost, the computer may not be able to run normally.

What’s worse, it prompts errors like SPECIAL POOL DETECTED MEMORY CORRUPTION BSOD. Therefore, it is necessary to run an SFC scan when the issue occurs.

Step 1: Type cmd in the search box, and then hit Run as administrator under the searched Command Prompt app.

Step 2: In the Command Prompt window, input sfc /scannow and press the Enter key on the keyboard.

Step 3: Wait until the process ends.

Fix 4: Check Hard Drive for Errors

A failing hard drive is also responsible for the SPECIAL POOL DETECTED MEMORY CORRUPTION blue screen error. You need to check if your system drive contains file system errors or bad sectors via a professional tool.

MiniTool Partition Wizard is what you need. It helps you detect and fix file system errors and check if there are bad sectors on the disk. As your computer is unbootable, you need to create a bootable USB drive first and then boot the faulty PC with it.

Here’s the detailed tutorial for you.

Step 1: Download, install, and then launch MiniTool Partition Wizard on a properly running computer.

MiniTool Partition Wizard DemoClick to Download100%Clean & Safe

Step 2: Click Bootable Media at the upper right corner of the interface and then click WinPE-based media with MiniTool plug-in in the pop-up window.

Step 3: Select a media destination from the displayed options. Here, we choose USB Flash Disk. The data saved on the USB drive would be removed, so make sure your USB doesn’t contain important data.

Step 3: Once the bootable USB drive is created, insert it into the target computer and then boot the PC from the burned drive.

Step 4: Follow the on-screen instructions to launch MiniTool Partition Wizard.

Step 5: Right-click on the target partition and select Check File System.

Step 6: In the prompted window, pick a scan option and click on the Start button. In this scenario, we choose Check & fix detected errors because any found errors would be fixed after the process ends.

Step 7: Wait for the finish of the process.

Fix 5: Scan the Computer for Viruses

You may receive the SPECIAL POOL DETECTED MEMORY CORRUPTION blue screen error due to malware or virus infection. Given that fact, you can solve the issue by scanning your computer for viruses and malicious programs with the following steps.

Step 1: Open Settings by holding the Windows and I keys.

Step 2: Tap Update & Security > Windows Security > Virus & threat protection.

Step 3: In the pop-up window, click Scan options to continue.

Step 4: Select Microsoft Defender Offline scan from the listed options and then click on the Scan now button to start the process.

Fix 6: Check RAM Issues

If there are any errors with your hardware like RAM, blue screen errors like SPECIAL­­_POOL_DETECTED_MEMORY_CORRUPTION would occur. So, once the error appears, you’d better check your RAM with the embedded utility: Windows Memory Diagnostic.

Step 1: Open the Run window, type mdsched.exe, and then click OK. By doing so, you can access Windows Memory Diagnostic.

Step 2: Hit the Restart now and check for problems (recommended) option to run the utility.

Step 3: The Windows Memory Diagnostic tool will automatically run after your PC restarts.

Step 4: After the diagnosis process ends, the computer will reboot again.

Step 5: To view the diagnosis report, open the Event Viewer from the Start menu and then choose Windows Logs. If you see any errors in the description, it indicates that there are issues with RAM. If so, replace the RAM with a new one.

Fix 7: Update Device Drivers

Malfunctioning drivers like the Realtek Wireless USB 2.0 adapter driver sometimes can lead to SPECIAL POOL DETECTED MEMORY CORRUPTION blue screen error. You should check if there’s a yellow exclamation mark next to the driver after you receive the error.

If there is, update the driver by following these steps.

Step 1: Right-click on the Windows icon to open the Start menu.

Step 2: Tap on the Device Manager option.

Step 3: Expand Network adapters by double-clicking on the option. Right-click on the Realtek network driver and hit Update driver.

Step 4: In the prompted window, click on Search automatically for drivers. If you want to update the selected driver, tap Browse my computer for drivers instead.

Fix 8: Analyze Minidump

Step 1: Right-click This PC and click Properties.

Step 2: In the pop-up window, find and click Advanced system settings.

Step 3: Under the Advanced tab, click on Settings in the Startup and Recovery section.

Step 4: Tick both the checkboxes of Write an event to the system log and Automatically restart under the System failure section.

Step 5: Click the arrow icon under Write debugging information to open the drop-down menu. Then pick the Small memory dump (256KB) option from the list.

Step 6: Type D:\Minidump in the field of the Small dump directory. At last, click OK to save changes.

Step 7: Then download Windows Driver Kit from its official page and then install the tool by following the prompted instructions.

Step 8: Run Command Prompt as administrator, type the command below, and press Enter to execute it.

cd c:\program files\debugging tools for windows

Step 9: If you want to load the dump file into a debugger, continue to run one of the following commands.

• windbg -y SymbolPath -i ImagePath -z DumpFilePath
• kd -y SymbolPath -i ImagePath -z DumpFilePath

Step 10: To save the file in C:\windows\minidump\minidump.dmp, execute this command: windbg -y srv*c:\symbols*http://msdl.microsoft.com/download/symbols -i c:\windows\i386 -z c:\windows\minidump\minidump.dmp

Step 11: Now, check the file to obtain the error information and explore the bugs in Google to repair this BSOD error.

Are you stuck on the SPECIAL POOL DETECTED MEMORY CORRUPTION BSOD? If so, pay attention to this post now! It collects several troubleshooting methods for you.Click to Tweet

Leave Your Words

This post summarizes possible reasons and available fixes for the SPECIAL­­_POOL_DETECTED_MEMORY_CORRUPTION BSOD error. You can refer to this guide if you are bothered by this issue. If you encounter any problems while using MiniTool Partition Wizard, please get in touch with us by sending an email to [email protected]. Our technical support team will help you solve them as soon as possible.