Typically, the USB drive only has one partition unless you divide it into different partitions. Partitions on a USB drive can be deleted accidentally or due to logical errors. In consequence, you will lose access to data stored on that partition. Thus, you may ask if it is possible to recover a deleted USB partition or whether you can recover only the data from the deleted USB partition. Both intentions can be achieved with the help of MiniTool software. You can refer to different sections to fulfill your purpose.
How to Recover Data from the Deleted USB Partition
When you delete the partition on the USB drive, data stored on it will be deleted as well. You fail to access these data but they are not immediately erased from the USB drive. Before you create a new partition and store new data to overwrite them, these files are still recoverable from the unallocated space.
Here I will guide you to recover data from the deleted USB partition.
About MiniTool Power Data Recovery
MiniTool Power Data Recovery is a powerful file recovery software that can recover files in a variety of situations, including accidental formatting, mistaken deletion, virus attack, and more. This free data recovery software supports you to recover files from deleted partitions, unrecognized external hard drives, corrupted computers, etc. You can use it to recover various types of files, like photos, videos, and archives….
Furthermore, this file recovery tool also works well in hard drive recovery, SD card recovery, memory card recovery, etc. You can try this tool to get data back as long as they have not been overwritten.
Detailed Guide to Recover Data
Here is a step-by-step guide to tell you how to recover data from the deleted USB partition.
You can get MiniTool Power Data Recovery Free first to experience its multiple features. With the free edition of this software, you can perform a deep scan and recover 1GB of files without any charge.
MiniTool Power Data Recovery FreeClick to Download100%Clean & Safe
Step 1: Suppose you have installed MiniTool Power Data Recovery on your computer successfully, you need to connect the USB drive to your computer and launch the software to enter the main interface.
Step 2: Here you can see all the detected partitions under the Logical Drives section. The deleted partition will show as Lost Partition on this interface. Hover your mouse over that partition and click Scan to start the scan process.
Step 3: Wait patiently until the scan process completes for the best data recovery result. The found files will be assorted into different folders according to their paths. You can expand the folder to look for your wanted files.
You can use the following features to quickly find the target files to increase the efficiency of the search. Switch to the Type category list to display files based on their types, like Picture, Video & Audio, Document, etc.
Additionally, the Filter feature helps to filter out unwanted files by setting file size, file category, file type, and file modified date. You can also use the Search feature to quickly locate a specific file by its name. To ensure data recovery accuracy, the Preview feature makes great sense. Photos, videos, documents, and audio are all supported to preview before saving them.
Step 4: You can add checkmarks in front of files you want to restore, then click on the Save button to choose a proper storage path.
There is a notification to inform you the data recovery process is completed. You can go to the selected destination to check your files.
Recover a Deleted USB Partition Using MiniTool Partition Wizard
The above method explains how to recover data from the lost USB partition. If you still need this partition, this part can give you instructions to recover the deleted USB partition. But USB partition recovery is not an easy deal. You will need reliable and functional third-party software to do it.
MiniTool Partition Wizard is a good USB partition recovery tool. This all-round partition management tool can not only configure partitions but also perform a partition recovery. Partition recovery will recover the lost/deleted partition as well as the data stored on it. Then, I’ll show you how to make it.
Step 1: You need to get MiniTool Partition Wizard and install it properly. Once installation is completed, connect your USB drive to the computer and double-click on the software to launch it.
MiniTool Partition Wizard FreeClick to Download100%Clean & Safe
Step 2: In the main interface, click on Partition Recovery on the top toolbar and click Next to continue.
Step 3: Select your USB drive and click Next.
Step 4: You need to choose the Scanning Range: Full Disk, Unallocated Space, or Specified Space. Then, click Next.
Step 5: Now, you need to choose the Scanning Methods. Choose to perform a Quick Scan or Full Scan based on your situation and click Next.
Step 6: When the scan process is finished, all the found partitions will be listed on the result page. Now, you can select the partition you need to restore. Please note that both the existing partitions and partitions that need to be recovered should be selected at this step. Click on the Finish button.
Step 7: In order to check the recovered partition in File Explorer, you can right-click on the partition and choose Change Letter. Select one letter from the dropdown menu and click OK to confirm.
Step 8: Click Apply at the bottom left of the main interface to fully apply the operation.
To recover a hard drive partition, you can read this post: How Do I Recover Hard Disk Partition with Ease?
An Additional Tip: Protect Your Data with MiniTool ShadowMaker
It is neither safe nor wise to save important files on one device without any backups. Data loss might happen in various situations, including human error, device corruption, virus attack, partition loss, and more. Data recovery can be a piece of cake if you have backups.
MiniTool ShadowMaker, a free backup software, is a good choice for you. It can effectively back up files, folders, disks, and partitions from or to internal hard drives and removable devices. After setting the backup period, your data will be backed up automatically on time. Additionally, you can perform an incremental or differential backup to avoid duplicate backups. MiniTool ShadowMaker Trial provides you with a 30-day free trial to experience its backup features.
MiniTool ShadowMaker TrialClick to Download100%Clean & Safe
Step 1: Get and install this backup software on your computer.
Step 2: Launch the software and shift to the Backup tab.
Step 3: Click on SOURCE and DESTINATION respectively to choose the backup content and storage path. After that, select Back Up Now to start the backup process. You can also choose Back Up Later and go to the Manage tab to configure the backup task.
How to Recreate a Partition on a USB Drive
Compared with recovering the deleted partition on the USB drive, creating a new partition is much easier. But before this, you should recover files from the deleted USB partition with MiniTool Power Data Recovery. Otherwise, your data may be damaged twice.
MiniTool Power Data Recovery FreeClick to Download100%Clean & Safe
When the data recovery process is done, you can try the following three methods to recreate a USB partition.
Way 1: Recreate a Partition Using Disk Management
Windows has an embedded tool, Disk Management, to help you manage partitions of both the internal hard drive and removable devices. You should be careful when using Disk Management to make changes as it applies changes to the device immediately.
Step 1: Right-click on the Windows icon and choose Disk Management from the WinX menu.
Step 2: Find the unallocated space on the USB drive. Right-click on it and choose New Simple Volume from the context menu.
Step 3: Click Next. In the following window, you should choose the size of the partition and click Next.
Step 4: Assign a drive letter to the partition from the dropdown menu.
Step 5: Choose the file system that fits your computer and click Next.
Step 6: Check whether all the information is correct and click Finish. The new partition is created.
Way 2: Recreate a Partition Using Command Prompt
Alternatively, you can run the Diskpart command lines on Command Prompt to create a new partition on your USB drive. The Diskpart command lines, like Disk Management, can manage partitions of hard drives, USB drives, and other data storage devices. But it is more powerful as it can work in a WinPE environment and implement other functions, such as setting mirrored volumes.
Now you can execute the Diskpart command lines following the next steps.
Step 1: Press Win + R to open the Run window.
Step 2: Type cmd into the text box and press Shift + Ctrl + Enter to run Command Prompt as administrator.
Step 3: Type the following command lines and hit Enter at the end of each one.
- diskpart
- list disk
- select disk x (Replace x with the number of your USB drive)
- create partition primary
- format fs=* quick (Change * to the file system that is compatible with your computer)
- assign letter=* (Replace * with the drive letter of the newly created partition)
- exit
Way 3: Recreate a Partition Using MiniTool Partition Wizard
If you are a newbie to partition management, a user-friendly partition management tool could be your primary option. MiniTool Partition Wizard can also help you create a new partition. Compared with Disk Management, you have one more chance to undo the wrong operation before it is implemented. You can download and install MiniTool Partition Wizard free to have a try.
MiniTool Partition Wizard FreeClick to Download100%Clean & Safe
Step 1: Connect the USB drive to the computer and run the software.
Step 2: Right-click on the unallocated space of your USB drive and choose Create from the context menu.
Step 3: In the following window, you can set the Partition Label, Drive Letter, and File System.
Step 4: Once the selections are finished, click OK. Then, you can preview the USB status after creating the new partition. If all information is correct, click Apply to finish the suspending process.
Bottom Line
Partition deletion always comes with data loss. You can recover a deleted USB partition with data intact by using MiniTool Partition Wizard. If you want to recover data from the lost USB partition, MiniTool Power Data Recovery can help you get it back.
Hope this post gives you some inspiration. If you encounter any problems with MiniTool software, feel free to contact us via [email protected].
About The Author
Position: Columnist
Andrea graduated in English and has a keen interest in the IT industry and questions that arise when computers are used. She is passionate about new things and challenging things and has a wide range of interests like playing guitar, gaming, and crafting.