How Can You Fix Error Code 0xc000000e in Windows 10?

Your PC/Device Needs to Be Repaired 0xc000000e

When using your computer, you may encounter different kinds of Blue Screen of Death and Black Screen of Death issues. The Recovery Error code 0xc000000e, Your PC needs to be repaired is one representative. When you encounter this problem, you may need to recover your files using data recovery tool in some cases. But you should first know the main reasons for this issue.

MiniTool Power Data Recovery FreeClick to Download100%Clean & Safe

What Can You See When Your Computer Boots into Error Code 0xc000000e?

When your computer boots into error 0xc000000e, you will see a blue screen with the error message as follows:

This error message indicates that there is a hardware failure or a faulty drive configuration on your Windows computer. The specified error message you receive may be different:

• An expected error has occurred.
• Required device is inaccessible.
• The selected entry could not be loaded.
• A required device isn’t connected or cannot be accessed.
• The selected entry could not be loaded because the application is missing or corrupt.
• The boot selection failed because a required device is inaccessible.
• And more…

The Reasons for Windows 10 Boot Error 0xc000000e

The exact causes for error 0xc000000e are various, including the winload.exe file is not accessible or is corrupt, or the boot location for the operating system cannot be located.

When you are facing the Windows 10 boot error 0xc000000e issue, you can first check the cables of your drives to see whether the connections are good. If the connections are OK, you will need to take some deep measures to make your computer boot from the operating system successfully.

We search for your PC/device needs to be repaired 0xc000000e on the internet and discover some solutions that are proved to be available to solve the issue. If you are also looking for related solutions, you can read this article to get what you want to know.

How to Fix Error Code 0xc000000e in Windows 10?

We collect the following solutions to solve the error 0xc000000e. But, you may don’t know the exact reason for this issue. Thus, you can try these solutions to help you out.

• Check Physical Device Connections.
• Rebuild Boot Configuration Data File.
• Run Windows Repair Utility.
• Enable Windows 8.1/10 WHQL Support Setting in BIOS.
• Reset the BIOS/UEFI Configuration.
• Mark Boot Disk as Online.
• Reinstall Windows 10.

Click to Tweet

Solution 1: Check Physical Device Connections

This is the easiest but most overlooked solution.

When your computer boots into error 0xc000000e, you can first check if there are any other devices that are connected to your computer.

Why do you need to do this check?

That’s because the configuration of the BIOS or UEFI might be configured in such a way that any external device attached has a higher boot priority than that of the hard disk. If so, your computer may try to boot from the externally attached disk but not the drive that contains your operating system. And then, your computer might boot into error 0xc000000e.

We suggest checking these devices: external USB storage devices, pen drives, CDs, DVDs, etc.

However, if your computer still can’t boot normally after checking these devices, you will need to take some other measures to get rid of the error 0xc000000e. You can keep on reading.

Solution 2: Rebuild Boot Configuration Data File

Boot Configuration Data, which is also known as BCD, contains the boot configuration parameters about how to start your Windows OS. If the configuration file is corrupted, your Windows 10 will fail to boot like Windows 10 boots into error 0xc000000e.

To fix the corrupted configuration file, you need to rebuild BCD on your computer.

Since your Windows is unbootable now, you need to create a bootable USB medium from ISO for Windows 10 and then boot from it. After that, you can follow these steps to rebuild BCD on your computer.

1. Click Next when you see the first screen after booting your computer from the bootable USB medium.

2. You will see the Install now But, you should not press the Install now button. You need to press the Repair your computer link that is on the lower-left corner instead to continue.

3. Go to Troubleshoot > Advanced options > Command Prompt.

4. Choose the account you are using to continue.

5. If you have set a password for your computer, input it to continue.

6. Type in the following command and press Enter:

bootrec /rebuildbcd

7. When a Windows installation is found, you need to press Y on the keyboard to let it boot from the list. This will rebuild BCD.

8. When the operation completes, you need to type in bootrec /fixmbr and bootrec /fixboot successively and press Enter after each command.

When the whole process ends, you can reboot your computer to see whether it can boot without error 0xc000000e.

If rebuilding BCD can’t fix error 0xc000000e, you can perform Windows Startup Repair to have a try.

Solution 3: Run Windows Startup Repair

Startup Repair is capable of diagnosing and fixing the found issues. For example, it can automatically scan system files, registry settings, configuration settings, etc. and try to fix the problem on its own. Startup Repair is especially useful when your computer is unbootable.

Since your computer fails to boot, Windows can boot into WinRE automatically. While, if it doesn’t appear, you can interrupt the boot process three times in a row and then the WinRE screen appears.

Alternatively, if you have a bootable USB medium, you can also set your computer to boot from it and go to Repair your computer to enter WinRE.

Then, you should go to Troubleshoot > Advanced options > Startup Repair.

Windows will begin to diagnose your computer automatically. When the process ends, your computer will restart automatically. You can wait to see whether it can boot successfully.

If Windows Startup Repair can’t solve your issue, you need to try the next solution.

Solution 4: Enable Windows 8.1/10 WHQL Support in BIOS

The Windows 8.1/10 WHQL Support setting exists in some of the OEMs. It has two basic functions: checks for signed drivers during the boot process and allows you to enable UEFI support.

If you are using Windows 8.1/10, you need to enable it and then your computer can boot normally. However, if it is not selected, your computer may boot into error 0xc000000e.

So, you can access BIOS to see whether the Windows 8.1/10 WHQL Support setting is enabled. If not, enable it to have a try.

You should note that the Windows 8.1/10 WHQL Support setting is not supported in all computers. If your computer doesn’t have it, you can go to check whether the UEFI support is enabled on your computer. If not, you can enable it to see whether the error code 0xc000000e disappears.

If Windows 10 boot error 0xc000000e still appears after enabling the Windows 8.1/10 WHQL Support setting or UEFI support, you may need to reset the BIOS/UEFI configuration on your computer.

Solution 5: Reset the BIOS/UEFI Configuration

Some users said that their error 0xc000000e issue is solved by resetting the BIOS/UEFI configuration. So, you can consider trying this method to see whether this issue can be solved.

Solution 6: Mark Boot Disk as Online

When the boot disk is marked as offline by mistake, your computer will definitely fail to boot. Windows 10 boot error 0xc000000e is one form of manifestation. In a situation like this, you need to mark that disk as online to make your computer boot successfully.

You still need to use a bootable USB medium to do this job. We will show you a step-by-step guide here:

1. After booting your computer from the bootable USB drive, you need to go to Next > Repair your computer. Then, you will enter WinRE.
2. Go to Troubleshoot > Advanced options > Command Prompt.
3. Select your user account and input the password to continue.
4. Type in diskpart into the Command Prompt window and press Enter to initiate the Diskpart utility inside of the Command Prompt.
5. Type in list disk or list volume, and press Enter to list all the disks or partitions on the computer.
6. Type in select disk * or select volume *, and press Enter to select the needed disk or partition that contains the operating system.
7. Type in online disk or online volume, and press Enter to mark the selected disk or partition as Online.
8. Type exit and press Enter to leave diskpart.
9. Close the Command Prompt window.

After these steps, you can reboot your computer to see whether the error 0xc000000e disappears.

If unfortunately you are still bothered by this error, you will need to reinstall your Windows.

Solution 7: Rescue Your Data and Reinstall Windows

Step 1: Rescue Your Data on the Computer

To keep your computer data safe, you’d better rescue them from your computer using third-party data recovery software.

You can consider using MiniTool Power Data Recovery because it is a professional data recovery software and the bootable edition enables you to recover your data from an unbootable computer.

You need to use a MiniTool snap-in WinPE bootable builder to create a bootable medium that allows you to boot your computer into MiniTool Power Data Recovery Bootable Edition.

You need to access the MiniTool official store to select a suitable edition that contains a bootable builder for further use. Additionally, you also need to prepare an external USB storage drive with enough capacity to save your data.

You can follow these two guides to create a bootable medium on a normal working computer and then set your computer to boot from that medium:

• How to Build Boot CD/DVD Discs and Boot Flash Drive with Bootable Media Builder?
• How to Boot from Burned MiniTool Bootable CD/DVD Discs or USB Flash Drive?

When the computer enters the MiniTool Power Data Recovery Bootable Edition, you can follow these steps to rescue your data:

1. After the software is opened, you can see all the drives on your computer. Next, you should select the drive you want to recover data from and click the Scan button to continue.

2. The software will begin to scan the selected drive. When the process ends, you can see the scan results. Then, you can select the files you want to recover and click the Save button to select a proper location to save them. In this case, you should select an external drive to save your selected files.

Click to Tweet

Now, your needed files are saved to the external storage drive. You can close this software, shut down the computer, and then reinstall Windows 10 on your computer.

Perform Windows Reinstallation

You still need to use the bootable USB medium to perform a Windows 10 reinstallation.

1. Set your computer to boot from the bootable USB drive.

2. When you see the first page after booting, click Next to continue.

3. Click Install now.

4. Since your operating system has already been activated, you can click the I don’t have a product key link to enter the next page.

5. Select your needed operating system and press Next.

6. Check I accept the license terms.

7. Click Next.

8. Select Custom: Install Windows only (advanced).

9. On the following page, you need to select the drive you need to install Windows 10. Usually, it is Drive 0. Just select it and then click Delete to remove the partition from the hard drive.

10. Click OK.

11. Choose the empty partition.

12. Click Next.

The Windows reinstallation process will begin. After that, you can create a new account and set up the environment based on your actual requirements.

When the entire Windows reinstallation process ends, your computer can boot normally.

We hope these solutions can solve your issue effectively.

Bottom Line

After reading this article, you will discover that it is not so difficult to fix Windows 10 boot error 0xc000000e. There is always one method that can help you get rid of the error completely. In addition, if you are looking for the best free data recovery software, you can try MiniTool Power Data Recovery.

If you still have other problems with this error code 0xc000000e or want to know more information about MiniTool software, you can just contact us via [email protected] or let us know in the comment.

Error Code 0xc000000e FAQ