How to Fix DRIVER VERIFIER DMA VIOLATION in Windows 10/11

Meet BSOD in Windows system? That’s frustrating and troublesome. When the Blue Screen appears, it will be accompanied by different stop codes, such as PAGE FAULT IN NONPAGED AREA. And this post is mainly talking about Windows stop code DRIVER VERIFIER DMA VIOLATION BSOD.

What is DRIVER VERIFIER DMA VIOLATION (DRIVER_VERIFIER_DMA_VIOLATION)? It has an error code 0x000000E6 and this error appears because device drivers act abnormally. Then how to fix DRIVER VERIFIER DMA VIOLATION Windows 10/11? Keep reading.

Method 1: Update Your Operating System

Keeping your system up to date can avoid many errors appearing. Therefore, when you meet the DRIVER VERIFIER DMA VIOLATION Windows 10/11 error, updating your system may help you get rid of the error. Here is what you need to do:

Step 1: Press the Win + I keys at the same time to open Settings and then choose Update & Security.

Step 2: Click Windows Update and then choose Check for updates on the right panel.

Step 3: If your system is not up to date, Windows will start to download updates automatically.

Step 4: Reboot your computer to finish updating your system. Then the Windows 10 DRIVER VERIFIER DMA VIOLATION error should be fixed.

[SOLVED] Windows Update Cannot Currently Check for Updates

Troubled by the issue Windows Updates cannot currently check for updates? This post shows 4 solutions to fix Windows update failed problem.

Read More

Method 2: Disable Driver Verifier

If Driver Verifier meets some unexpected problems, then the DRIVER VERIFIER DMA VIOLATION error will appear. Thus, you can try disabling Driver Verifier to solve the problem. Here is a quick guide:

Step 1: Type verifier in the Search bar and then click the best match one to open Verifier. If a UAC prompts, click Yes.

Step 2: In the pop-out window, choose Delete existing settings and then click Finish.

Step 3: Restart your system and then see whether the error is gone.

If the error doesn’t disappear after you disable Driver Verifier, then you need to reset the Verifier. Here is what you need to do:

Step 1: Press the Win + R keys at the same time to open the Run box.

Step 2: Type cmd in the box and then press the Shift + Ctrl + Enter keys at the same time to open Command Prompt as an administrator.

Step 3: Type Verifier /reset in the window and then press Enter.

Step 4: Restart your computer and then check if the DRIVER VERIFIER DMA VIOLATION error disappears.

Method 3: Make Changes to the Drivers

You can also try to make some changes to your drivers to fix the DRIVER VERIFIER DMA VIOLATION error because outdated or corrupted drivers will trigger the BSOD error in Windows 11/10.

Update Your Drivers

If you haven’t updated your drivers for a long time, then the culprit of the DRIVER VERIFIER DMA VIOLATION error may be outdated drivers. So updating your drivers may fix the problem.

Step 1: Press the Win + X keys at the same time to select Device Manager.

Step 2: Right-click the device with a yellow indication to choose Update driver.

Step 3: Choose Search automatically for updated driver software, and then follow the on-screen instructions to finish updating the driver. If you have several devices with yellow indications, then do the same as above for all.

Step 4: Reboot your computer and then check if the error is gone.

Roll Back Your Drivers

If you recently updated your driver, and the driver is not compatible with your system or it is corrupted, then you will get the DRIVER VERIFIER DMA VIOLATION BSOD error. Thus, you need to roll back your driver to solve the problem.

Step 1: Open Device Manager and then find the drive that you recently updated. Right-click the driver to choose Properties.

Step 2: In the newly pop-out window, go to the Driver tab and then click Roll Back Driver. Then follow the instructions showing on the screen to roll back the driver.

Step 3: Reboot your computer to check if the error persists.

Method 4: Run the Blue Screen Troubleshooter

Running the Blue Screen Troubleshooter will easily help you get rid of the DRIVER VERIFIER DMA VIOLATION error from your Windows 10/11 PC. Here is the tutorial:

Step 1: Open Settings, choose Update & Security and then click Troubleshoot.

Step 2: Click Blue Screen in the right panel and then click Run the troubleshooter.

Step 3: Follow the on-screen prompts to complete the troubleshooting. Restart your computer and then see if the error is fixed.

Method 5: Run the SFC Tool

If running the Blue Screen Troubleshooter cannot solve the issue, then you can run the SFC tool to scan your system and repair detected issues. Here is a quick guide:

Step 1: Open Command Prompt as an administrator, type sfc /scannow in the window and then press Enter.

Step 2: Wait until the procedure is done. Normally, if there is something wrong being detected, the SFC tool will repair them automatically.

Step 3: Restart your computer to check whether the DRIVER VERIFIER DMA VIOLATION error is fixed.

Method 6: Run the DISM Tool

Running the SFC tool failed? Then you can try to run the DISM tool. DISM can also help you scan for corrupted system files and repair them automatically. Here is what you need to do:

Step 1: Open Command Prompt as an administrator as mentioned above.

Step 2: Type DISM.exe /Online /Cleanup-image /Restorehealth in the window and then press Enter.

Step 3: Wait for the process to finish. Then restart your system to check if the error still exists.

Full Solved - 6 Solutions to DISM Error 87 Windows 10/8/7

When you run DISM tool to prepare and fix some Windows images, you may receive an error code like 87. This post shows how to fix the DISM error 87.

Read More

Method 7: Check for Faulty Hardware

The BSOD errors often caused by faulty hardware (such as RAM and motherboard), therefore, it is highly recommended to check if your hardware works normally. If your hardware doesn’t work well, then you can try to replace it to get rid of the DRIVER VERIFIER DMA VIOLATION error.

You may be interested in the two posts: How to Tell If RAM Is Bad? 8 Bad RAM Symptoms Are for You! and How to Test Motherboard for Faults? Much Info Is Introduced!

Method 8: Update Your BIOS

Outdated BIOS can cause many troubles and the DRIVER VERIFIER DMA VIOLATION BSOD error is one of them, so you need to update your BIOS to fix the error. But you need to be careful when you perform the method because the faulty operation will cause serious damage to your motherboard.

Method 9: Update Your SSD Firmware

If you install Windows on your SSD, then it is recommended to update your SSD firmware because outdated firmware may trigger different BSOD errors such as DRIVER VERIFIER DMA VIOLATION.

However, if you fail to perform the SSD firmware update operation properly, it may cause permanent damage and lose all data. Therefore, you must be extremely careful and follow the correct instructions provided by the manufacturer to complete the task.

Method 10: Perform System Restore

If you have created a restore point in advance, then you can perform System Restore to make your computer go back to the previous normal state of Windows 11/10. Here is a simple guide:

Step 1: Open the Run box, type rstrui in the box and then click OK to open System Restore.

Step 2: In the pop-out window, click Next. Then choose s system restore point from the list and click Next.

Step 3: Confirm your restore point and then click Finish. Read the message saying that “Once started, System Restore cannot be interrupted. Do you want to continue?”, then click Yes.

Step 4: Wait until the process is completed, then your computer can run normally without the DRIVER VERIFIER DMA VIOLATION blue screen error.

4 Errors Solved – System Restore Did Not Complete Successfully

The problem of system restore did not complete successfully may be caused by different reason. This article shows you how to solve Windows 10 restore failed.

Read More

Method 11: Reset Windows 10/11

If none of the methods above solve the DRIVER VERIFIER DMA VIOLATION error, then you need to reset your PC. Here is what you need to do:

Step 1: Click Update & Security on the Settings page.

Step 2: Go to the Recovery tab and click Get Started under the Reset this PC section on the right panel.

Step 3: Choose whether to Keep my files or Remove everything while resetting your PC.

Step 4: Follow the prompts on the screen to finish the process. After you reset your system, you can run your system without BSOD.

Click to Tweet

Top Recommendation: Back up Your Windows System

It is common to meet data loss due to system crash, power failure, BSOD and virus attack. Then you may wonder how to avoid losing data. The answer is to back up your data. And you’d better back up your system in advance so that you can easily restore your system to normal state without performing the above methods when you meet BSOD errors.

Referring to backup, it is strongly recommended to use MiniTool ShadowMaker – a piece of fantastic and wonderful backup and restore software for Windows. It allows you to back up files and folders, disks and partitions, and even the operating system. And you can save backup images to four different locations: Administrative, Libraries, Computer, and Shared.

And the Sync feature is useful to sync files and folders to other locations. While the Disk Clone feature allows you to create a bootable external hard drive and clone simple volumes in the dynamic disks.

What’s better, MiniTool ShadowMaker offers you a Trial Edition with 30 days to enjoy all the features.

MiniTool ShadowMaker TrialClick to Download100%Clean & Safe

Here is the way to back up your Windows system using MiniTool ShadowMaker:

Step 1: Install and launch MiniTool ShadowMaker, then click Keep Trial.

Step 2: Go to the Backup page. MiniTool ShadowMaker selects your system as the source by default and it selects the backup destination by default, too. However, you’d better choose your external hard drive as a backup destination by clicking the DESTINATION.

Step 3: After you have confirmed the backup source and destination, then click Back Up Now to back up your system immediately. You can also click Back Up Later to delay the backup.

And you’d better create bootable media when your system runs normally so that you can use it to boot your computer when your computer fails to boot.

Bottom Line

This post focuses on the DRIVER VERIFIER DMA VIOLATION Windows 11/10 error. It offers you 11 useful methods to deal with the error, so if you meet the error, try the methods mentioned above. And if you have any better suggestions or have any confusion about the methods, leave a comment below or send an email to [email protected].

DRIVER VERIFIER DMA VIOLATION FAQ